Rug Product Information
What our rugs are made of, how the non-slip backing works, and how to look after your rug and your floor.
Materials
- Top: 100% polyester, machine washable.
- Backing: polyester felt with silicone non-slip dots.
- Edges: overlocked with polyester thread.
The silicone dot backing
The small raised dots on the underside keep the rug in place on hard floors. They are made of silicone rubber (methyl vinyl silicone rubber) reinforced with silica, with a curing agent, a small amount of processing aid and pigment.
Floor compatibility
Our rugs are made for indoor use on hard floors. Floor finishes vary widely, so it is best to check with your flooring manufacturer or installer that a silicone dot backing is suitable for your floor before use, particularly for wood floors and floors with a special or recently applied finish.
Most hard floors are not affected by a non-slip backing. However, certain floor finishes are sensitive to it and may show marks over time. Lift the rug regularly and let the floor air, following the steps below.
Looking after your floor
- Lift the rug every few weeks, vacuum underneath and let the floor air.
- On underfloor heating or in strong direct sunlight, lift it more often.
- Make sure the rug and the floor are completely dry before laying the rug down.
- Do not place the rug on a newly installed or newly finished floor until the finish has fully cured. Ask your installer how long that takes.
Rug care
Crease removal. To reduce our environmental impact, we ship your rug folded in a compact box. Once unpacked, simply lay your rug flat and allow 2 to 3 days for any creases to relax naturally.
Cleaning. Blot stains immediately with a clean sponge or cloth. Spot clean with a mild detergent as required. Machine wash at cold temperatures and on a gentle cycle; do not bleach or use fabric softener. Air dry flat or hang to dry.
